10W 1064nm High Power Polarization Insensitive Isolator HPPII

MFG PART#:

10W 1064nm High Power Polarization Insensitive Isolator HPPII

The Fiber-Mart's 1064nm High Power Polarization Insensitive Circulator is characterized with low insertion loss, high isolation, high power handling, high return loss. It is ideal for fiber laser and instrumentation applications.

Characteristics

  • Low insertion loss
  • High Return Loss
  • High Power Handling
  • High Isolation

    • Applications

  • Fiber Amplifier
  • Fiber sensor
  • Instrumentation
  • Lab Research


    • Specifications

    Parameters
    Unit
    Values
    Center Wavelength
    nm
    1064 or Specify
    Operating Wavelength Range
    nm
    ±10
    Typ. Peak Isolation
    dB
    32~40
    Min. Isolation at 23℃
    dB
    26
    Typ. Insertion Loss at 23℃
    dB
    0.6
    Max. Insertion Loss at 23℃
    dB
    1
    Min. Return Loss (input/output)
    dB
    50/50
    Max. Polarization Dependent Loss
    dB
    0.15
    Max. Optical Power(CW)
    W
    1, 3, 5, 10, 20
    Max. Tensile Load
    N
    5
    Fiber Type
    HI 1060 Fiber or LMA Fiber
    Operating Temperature
    ℃
    -5 ～+50
    Storage Temperature
    ℃
    -20～+75

    Dimension


    Order Information

    HPPIIWavelengthHanding PowerPigtail TypeFiber TypeConnector Type on in&outFiber Length
    HPPII-1064-101=1064nm
    S=Specify    		1=1W
    2=5W
    3=10W
    4=20W
    100=100W
    S=Specify    		1=900um Loose Tube
    2=3mm Loose Tube
    S=Specify    		1=HI1060 fiber
    2= LMA fiber
    S=Specify    		N=None
    S=Specify    		1=0.8m
    S=Specify

    评论

    发表评论

    此博客中的热门博文

    Common Armored Fiber Optic Cables

      Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
    阅读全文

    what the Differences Between FBT Splitter and PLC Splitter

      In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
    阅读全文

    Introduction of Optical Fiber Couplers and How Do They Work?

     What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
    阅读全文