Optical Fiber Identifier ST-3306B

Description

ST-3306B Optical Fiber Identifier can quickly identify the direction of transmitted fiber and display the relative core power without any damages to the bended fiber. When the traffic is present, the intermittently audible tone is activated.
There are four adapter heads available: Ø0.25, Ø0.9, Ø2.0 and Ø3.0, besides the Ø0.25 is applicable for bare fiber, the other three different dia. adapter heads are applicable for pigtails. With the ST-3306B fiber identifier, you can indicate the signal direction in different fibers.

Features

Easy-to-use with “ONE KEY” operation
Efficiently identifies the traffic direction and frequency tone (270Hz, 1KHz, 2KHz) with audible warning.
Displays the relative core power
More accurate test with Sunshade
Easy-to-replace adaptors
Durable metal housing and quality construction
Lower power indication

Standard Package

ST-3306B Optical Fiber Identifier, 4pcs adapter heads, Sunshade, User Manual, Cotton Stick and Soft Carrying case.

Fiber-Mart is specializing in supplying fiber optic components and network equipment, and we are trying to complete this system. For this optical fiber identifier, we provide one year warranty for that. If you have any problems or special requirement or want to buy this high performance optical fiber identifier ST-3306B at a large quantity, please feel free to contact us. We will try our best to provide you the best service.

Specifications



Type		ST-3306B
Identified Wavelength Range800-1700 nm
Identified Signal TypeCW, 270Hz±5%,1kHz±5%,2kHz±5%
Detector TypeØ1mmInGaAs 2pcs
Adapter TypeØ0.25 (Applicable for Bare Fiber)
Ø0.9 (Applicable for Ø0.9 Cable )
Ø2.0 (Applicable for Ø2.0 Cable )
Ø3.0 (Applicable for Ø3.0 Cable )
Signal DirectionLeft & Right LED
SingeDirection Test Range
(dBm, CW/0.9mm bare fiber)		-46~10(1310nm)
-50~10(1550nm)
SignalPower Test Range
(dBm, CW/0.9mm bare fiber)		-50~+10
Signal Frequency Display (Hz)270, 1k, 2k
FrequencyTest Range
(dBm, Average Value)		Ø0.9, Ø2.0, Ø3.0-30~0 (270Hz,1KHz)
-25~0 (2KHz)

Ø0.25		-25~0 (1KHz,2KHz)
-20~0 (2KHz)
Insertion Loss(dB, Typical Value)0.8 (1310nm)
2.5 (1550nm)
Alkaline Battery(V)9
Operating Temperature(°C)-10~+60
Storage Temperature(°C)-25~+70

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文