ST-3000MX Auto Fiber Ferrule Epoxy-inject Machine

ST-3000MX Auto Fiber Ferrule Epoxy-inject Machine

1, stable performance, reliable quality
2, simple and convenient operation, high precision
3, Chinese / English optional interface
4, stand-alone operation, installation is the easiest
F series of three axis automatic dispensing robot completely without external computer collocation can be stand-alone operation, not only convenient installation, operation setting is more simple
5 humanized teaching box program
Teach box icon button design, users in the fingertips to easily complete the dispensing path set, complete the simple replication, migration path matrix modification, calibration set...... At the same time, the machine has the function of the program transmission between the super function
6, professional interpolation control system
Control card carefully developed F series of three axis dispensing manipulator become a real PTP and the CP three axes interpolation device, applicable to any non planar 3D dispensing path
7, suitable for ceramic core automatic dispensing
8, the machine with a needle on the control button, no external controller, more convenient than similar products
 
Model: ST-3000MX
The range of X/Y/Z (mm):200/200/50 dispensing
Maximum load Y-AXIS / Z-AXIS:8kg / 3kg
Moving speed X&Y / Z (mm/sec):0.1 ~ 800 / 350
Resolution: 0.01 mm/Axis
Repeat accuracy: + / - 0.02 mm/200
Program recording mode: 100 groups, each group of 4000 points (U disk can support COPY)
Display mode: LCD (320 * 240)
Motor system: micro stepping motor precision day
Mode of operation: point-to-point / continuous line
Transmission: synchronous belt + precision linear guide rail
Movement between the function: 3 axis (3D three-dimensional space can be any route)
Edit mode: teach box / PC
I/0 signal I/O:8 Inputs / 8 Outputs
External control interface: RS232
Input power: AC110/220V (internal switch conversion) 300W
Working environment temperature: 5~40
Working environment humidity: 20~90%
Dimensions (WxDxH mm):413 x 439 x 534
Body weight (kg):28

评论

发表评论

此博客中的热门博文

Common Armored Fiber Optic Cables

  Armored fiber optic cables are often installed in a network for added mechanical protection, as they have extra reinforcing in the cable housing to prevent damage. Two types of armored fiber optic cables exist: interlocking and corrugated. Interlocking armor is an aluminum armor that is helically wrapped around the cable and found in indoor and indoor/outdoor cables. It offers ruggedness and superior crush resistance. Corrugated armor is a coated steel tape folded around the cable longitudinally. It is found in outdoor cables and offers extra mechanical and rodent protection.   The Structure of an Armored Fiber Optic Cable In basic armored fiber cable designs, the outer sleeve provides protection against wind, solvents, and abrasion. This outer sleeve is usually made of plastic such as polyethylene. The next layer between the sleeve and the inner jacket is an armoring layer of materials that are difficult to cut, chew, or bu
阅读全文

what the Differences Between FBT Splitter and PLC Splitter

  In FTTx and PON architectures, optical splitter plays an increasingly significant role to create a variety of point-to-multipoint fiber optic networks. But do you know what is a fiber optic splitter? In fact, a fiber optic splitter is a passive optical device that can split or separate an incident light beam into two or more light beams. Basically, there are two types of fiber splitter classified by their working principle: fused biconical taper splitter (FBT splitter) and planar lightwave circuit splitter (PLC splitter). You may have one question: what’s the difference between them and shall we use FBT or PLC splitter?   What Is FBT Splitter? FBT splitter is based on a traditional technology to weld several fiber together from side of the fiber. Fibers are aligned by heating for a specific location and length. Because the fused fibers are very fragile, they are protected by a glass tube made of epoxy and silica powder. And then a stainless steel tube covers the inner glass tu
阅读全文

Introduction of Optical Fiber Couplers and How Do They Work?

 What are optical fiber couplers? A fiber optic coupler can be defined as an optical component used with one or more input fibers and several output fibers in fiber optic systems. A coupler essentially puts two or more cores of fibers together to connect. The simple coupler is the fused fiber 2x2 coupler. Couplers are used as multiplexers that are resistant to certain wavelengths. A fiber output depends on the wavelength of light and the frequency of polarization. The fiber refractive index also plays a significant role in the performance. Let’s checkout how do optic couplers work to understand this better. How do fiber optic couplers work? Either fiber optic couplers separate optical signals into multiple paths or combine multiple signals in one direction. Optical signals are more complicated than electrical signals, making it more difficult to design optical couplers than their electrical copy. Unlike electrical currents, the optical signal consists of a stream of signal carriers, in
阅读全文